EMD DD35A and (Cabless DD35) | ||
---|---|---|
Data Sheet Information Compiled by: JEAN-DENIS BACHAND | ||
New: 26 June 2006 | Artwork by: Jean-Denis Bachand | |
- | ||
Engine Builder: EMD | Engine: Two 567D3A 16 cylinder | |
Bore & Stroke | 8.5" X 10" | |
RPM (Maximum / Minimum) | 800 / 275 | |
Main Generator: Two GM - D32 | Horsepower: 5000 | |
Gear Ratio: 59:18 | Speed: 90 mph | |
Trucks: 8-Wheel | Configuration: D-D | |
Traction Motor Blowers: Belt Drive (4) | Model: GM | |
Weight: 519,353 lbs (and 521,980 for cabless unit | Traction Motors: Eight GM - D67 | |
Tractive Effort (starting) 113,940 lbs @25% | Tractive Effort (continuous): 103,000 lbs @ 12 mph | |
Multiple Unit Capability: Yes | Dynamic Braking: Yes | |
Auxilary Generator: GM | Alternator: Delco A8102 | |
Air Brake: Westinghouse | Model: 24L | |
Compressor: Gardner-Denver | Model: WBO | |
Quantity Built: 30 | Dates: 11/63 to 9/64 (and 4/65 to 5/65 for Cabless units) | |
- | - | |
Exterior Dimensions | DD35A | |
Total Length | 88'-02" (and 87'-11 for cabless units) | |
Wheel Diameter | 40" | |
Truck Wheel Base | 17'-01" | |
Height to Top Engine Hood | 15'-09.5" | |
Height to Top Cab | 17'-02" (15'-09.5" for cabless unit) | |
Cab Width | 10'-03" | |
Top of Walkway | 9'-04.5" | |
Walkway Width | 4'-03.5" | |
Engine Hood Width | 10'-00" | |
Center Bolster | 55'-00" | |
Center Front Truck to Front Pilot | 2'-04.5" | |
Center Rear Truck to Rear Pilot | 4'10" | |
Distance between Truck Centers | 72'-01.5" | |
Minimum Turning Radious | 57 degrees | |
- | - | |
Fuel Oil: 5200 | Lubricating Oil: 486 | |
Engine Cooling Water: 550 | Sand Capacity: 40 cu. ft. | |
Options: - | ||
- | ||
Artwork by: JEAN-DENIS BACHAND | ||
- | ||
Reference Sources:
|